Acrylic consolidating bonding bridge
PUN5000CA- Acrylic consolidant and insulator in aqueous micro emulsion, especially for the treatment of disintegrated and decohesioned mineral surfaces, plasters, building elements, plaster or gypsum boards.
- High degree of penetration and re-aggregation action, both superficial and deep, acting as a binder in the material and eliminating problems due to disintegration, facilitating adhesion and optimising coating and/or finishing operations.
- It does not alter the chromatic appearance of the substrate nor significantly modifies its breathability and water vapour permeability. High resistance to UV rays.
DESTINATION Plasters, absorbent building products, cement, gypsum and plasterboard. USE Apply PUN5000CA only on absorbent, clean and dry surfaces, which show phenomena of chalking and superficial disintegration. Dilute the product in water in ratios of 1:1 or 1:2 (respectively 50% and 30% in water) depending on the degree of deterioration. Apply PUN5000CA, as needed, using a low pressure sprayer or a soft natural fiber brush, uniformly saturating the support in one or more coats. It is important to avoid superficial stagnations of the product. Wait at least 6/12 hours in order to evaluate the effectiveness of the treatment. Carry out preliminary tests on the surface to be treated in order to avoid possible undesirable effects. WARNINGS - Product intended for professional use. - Operating temperatures: + 5 ° C to + 35 ° C. - Do not apply in conditions of high humidity, impending rain and in full sun. - Carefully protect the surfaces for which the product is not intended. - Equip the operators as required by current safety regulations. - Ventilate closed rooms adequately while using the product. - Storage temperatures: +5 °C / +35 °C
Description
High penetration acrylic consolidant and insulator for loose mineral surfaces. Product based on micronized acrylic resins in aqueous micro-emulsion, particularly suitable for the insulating and consolidating treatment of absorbent chalky and/or loose mineral surfaces.Thanks to its particularcomposition and the extremely small size of its particles, PUN5000CA has a high penetration ability and carries out a strong consolidating action, both on surface and deep, acting as a binder on the material and eliminating any chalking problem. It also has the ability to make the absorption of the substrate extremely homogeneous, promoting adhesion and optimizing any over-painting and/or finishing operations. PUN5000CA does not alter the chromatic aspect of the support and does not substantially modify its breathability and permeability to water vapour, as well as having excellent resistance to UV rays. The product must be suited for the treatment of crumbling and loose mineral surfaces, plasters, building products, gypsum and plasterboard. The product must be dilutable according to the needs of use, it must be applied by brush and/or spray. It must not alter the chromatic aspect of the support, nor significantly alter its breathability and permeability to water vapour. It must be reversible. The product must be accompanied by a 16-section safety data sheet as required by current legislation.
Features
| PUN5000CA | |
|---|---|
| Capacity (in l) | 5 |
| Aspect | Straw-yellow semi-transparent liquid |
| Specific weight (in Kg/l±5%) | 1 |
| Yield (in m2/l) | 12-18 |
| Average particle diameter (in nm) | 30 |
| Minimum setting temperature (in ºC) | 5 |
| Viscosity (in mPa.s) | 30 |
| Drying time (in h) | 1-6 |
| Dimensiones | 195 x 235 x 165 mm |
| Peso | 5.393 kg |