Water based hydrorepellent
HID1000BA
1
5- Water based hydro-repellent for terracotta, stone, brick and absorbent construction elements.
- High capacity to penetrate and repel water, preventing saltpetre from leaving the material. Does not alter the colour, texture or natural breathability of the material.
- Drastically reduces installation time and costs. Easy to apply and dry.
DESTINATION Cotto flooring, stone, bricks and absorbent artifacts. USE AS PRE-TREATMENT Wait for the just laid floor to dry, then apply the product by diluting it 1:1 in water, with a soft natural bristle brush or with a low pressure nebulizer, until saturation. Apply HID1000BA / HID5000BA in several successive coats wet on wet, evenly and avoiding surface stagnation. Therefore wait 12/24 hours before proceeding with grouting operations. For the use of HID1000BA / HID5000BA as a base impregnating agent, before applying another product, it is recommended to apply the product undiluted, in a single coat, on a clean and dry surface. USE AS FINISHING TREATMENT The product is ready for use and can be applied, as needed, with a soft brush in natural fibers, low pressure vaporizer or fleece spreader, applying two coats, wet on wet, evenly and avoiding superficial stagnation. In case of particularly absorbent supports, apply until saturation of the same. Wait for the floor to dry in order to evaluate the effectiveness of the treatment. Avoid caustic detergents, acids, ammonia or varechin. STORAGE The product must be stored in its original, well-sealed containers, protected from light, in cool environments away from heat sources at temperatures between + 5 °C and + 30 °C. Under these conditions, the product is stable for 24 months. WARNINGS - Product intended for professional use. - Operating temperatures from + 5 ° C to + 35 ° C. - Do not apply in conditions of impending rain and in full sun conditions. - Carefully protect the surfaces for which the product is not intended. - Equip the operators as required by current safety regulations. - Properly ventilate closed rooms while using the product
Description
Water based hydro-repellent, pre-treatment for grouting operations and water-repellent impregnating finishing treatment. Aqueous emulsion, based on siloxanes, specifically formulated to make the cleaning of particularly porous materials extremely simple and fast after applying grouting mortars. It can also be used as a water-repellent finishing treatment. The water repellency imparted to the material prevents the deep penetration of the mortars, facilitating the final cleaning and treatment operations. Easy to apply and dry, it drastically reduces floor laying times and costs. It does not in any way alter the tone, color and natural breathability of the materials. It does not form surface films. In order
to avoid possible undesirable effects, it is advisable to carry out preliminary tests on the surfaces to be treated. Wait for the complete drying of the support in order to evaluate the effectiveness of the treatment. The water repellency imparted to the material must prevent the mortars from penetrating deeply inside them, facilitating the final cleaning and treatment operations. It must be easy to apply and dry; it must drastically reduce floor laying times and costs. It must not form surface films. The product in question must be accompanied by a safety data sheet with 16 sections as required by the legislation in force.
Comparative
Water based hydrorepellent
| HID1000BA | HID5000BA | |
|---|---|---|
| Capacity (in l) | 1 | 5 |
| Aspect | Straw-colored liquid | Straw-colored liquid |
| Specific weight (in Kg/l±5%) | 1 | 1 |
| Yield (in m2/l) | 8-12 | 8-12 |
| Dimensiones | 120 x 170 x 83 mm | 195 x 235 x 165 mm |
| Peso | 1.061 kg | 5.293 kg |